Wall Insulation For Home Energy Performance

Wall Insulation For Home Energy SavingsThe most common insulation for walls that have an open cavity is a kraft-faced paper fiberglass. This type of insulation provides insulation requirements for energy code as well as combining the interior vapor retarder that is needed in our area of the country. The energy code requires an “R” 15 for a 2×4 wall and a “R”19 for a 2×6 wall. Be careful most insulation for a 2×4 wall is “R”13 you have to upgrade to a high density insulation to achieve the “R” 15 that is required.

Spray In Insulation For Home Energy SavingsSpray Foam has become popular amongst mostly new construction homes and builds. This is a liquid spray that expands on the wall. It is also an adhesive so it sticks very well to the surface. This insulation will help with conductive and convective energy transfer. This product is considered a vapor retarder but does have the ability to wick water. Unfortunately the product doesn’t reflect or redirect heat it only absorbs and releases. We have found that those attic spaces and attics converted to living spaces still get hot in the Summer and Cold in the Winter. There are other insulations that will perform more effectively.

Blown-In Insulation Between Studs Saves On Your Utility BillsExisting home structures have completely enclosed walls so traditional fiberglass and spray foam can’t be used. Spray foam always expands, hard to control, and can cause permanent structural damage to a home. We recommend using a cellulose insulation for the wall cavity. The cellulose is a heavy insulation that will fill the wall cavity the best. This is preferably blown from the outside but we have installed from the inside for certain applications. We can determine this when providing the estimate and job-site inspection.

eShield on Walls Saves On Home Energy ConsumptionEshield 11000 can be used for wall applications to solve those heat loss & gain problems. Eshield can be used in combination with other insulation products to create the perfect wall and is usually less expensive than some foam products. The Eshield has applications throughout your entire house and is provided exclusively through Cronkhite Home Solutions. The product and combination systems can be great for garages and outbuildings as well.

Our Home Energy Inspection Includes Measuring:

Your Attic | Attic Insulation | Wall Insulation | Attic Ventilation | Other Energy Make-Over Products

 

At Cronkhite Home Solutions, we’re specialist in Home Energy Performance

We offer a vast array of some of the most technically advanced and home healthy products for wall and attic insulation in Central Illinois areas including: Peoria, Bloomington-Normal, LaSalle-Peru and Moline.

These products have been carefully selected for their energy efficiency effectiveness, their longevity, their health minded engineering, and their potential return on investment qualities. These products are fully supplied and installed by Cronkhite Home Solutions certified technicians.

If you are looking to save on energy, contact us today for more information or our Guaranteed Quote on your next project.

Get Your Home Energy Report Card

“Installer was very friendly and knowledgeable. He took time to make sure all my needs were met. In the end the door looks great and is square and seals. I would definitely recommend them for projects. I could not be any happier with job. AAA++ work.”

Mike C
Home Solutions Made Simple

Peoria’s Source for Top-Notch Exterior Remodeling Services

Providing Premium Windows, Siding, & So Much More
Get Your Project Started
Convenient Financing Options Available

Making Your Project More Affordable

We’ll Help You Find the Financing Plan That Works Best With Your Budget

Explore Financing Options

“Installer was very friendly and knowledgeable. He took time to make sure all my needs were met. In the end the door looks great and is square and seals. I would definitely recommend them for projects. I could not be any happier with job. AAA++ work.”

- Mike C

“Ryan the Installer was great, got all the windows installed in 2 days and actually came back on the 4th of July to finish all the flashing. Great job!”

- Gregory B

“The windows I purchased are beautiful and high quality. I am very pleased with the professionalism of the installer and the efficiency of my new windows. Any questions I asked where answered in a polite and informative manner.”

- Melinda H
Everlast logo
eshield logo
ProVia logo
Norandex logo
SoftLite logo
Tando logo
TimberTech logo